Tile Tools and Accessories

This premixed grout is directly ready to use.

This premixed grout is directly ready to use.

This premixed grout is directly ready to use.

This premixed grout is directly ready to use.

This premixed grout is directly ready to use.

Choose this type of serrated trowel suitable for your ceramic project.

Select this cleaner to remove dirt from your ceramic tiles.

UltraCare heavy-duty sealer and coating stripper is a professional-strength formulation that helps to remove tough coatings, lacquer s, varnishes, sealers, paints and epoxy grout haze from surfaces. This product effectively dissolves heavy wax, and helps to remove deep-set stains and heavy grease buildup. UltraCare heavy-duty sealer and coating stripper is water-based, pleasantly scented, nonfl ammable and easy to use.

UltraCare high-gloss sealer and finish is a one-step, water-based formula that provides a durable high-gloss finish and maximum stai n resistance. This product can also be used as a pre-grouting sealer. For interior use only. UltraCare high-gloss sealer and finish is non-yellowing and resistant to ultraviolet light.

This acidic cleaner is highly concentrated to remove grout haze, mortar residue, mineral deposits, rust stains and efflorescence from tile, concrete and masonry surfaces.

UltraCare penetrating stone, tile and grout sealer is an economical, natural-look, water-based penetrating sealer that protects agai nst most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed ceramic tile, masonry and cement grout. The product contains no silicones and can also be used as a pre-grouting sealer.

UltraCare penetrating stone, tile and grout sealer is an economical, natural-look, water-based penetrating sealer that protects agai nst most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed ceramic tile, masonry and cement grout. The product contains no silicones and can also be used as a pre-grouting sealer.

UltraCare penetrating stone, tile and grout sealer is an economical, natural-look, water-based penetrating sealer that protects agai nst most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed ceramic tile, masonry and cement grout. The product contains no silicones and can also be used as a pre-grouting sealer.

This remover can be used on all surfaces such as concrete, natural stone, including slate, marble and granite, as well as ceramic and porcelain tiles.

Trowel for the installation of Kerdi membrane BMR code 037-8026, 037-8035, 037-8044.

Choose this trowel to easily install your Ditra membrane.

Get this modified cement-based polymer sillicone to install your Kerdi boards.

Finish the installation of your ceramic tiles with this Kerapoxy grout.

Fix baseboards around windows and doors, as well as wall baseboards with this Ultrabond ECO 575 adhesive.

Fix baseboards around windows and doors, as well as wall baseboards with this Ultrabond ECO 575 adhesive.

Fix baseboards around windows and doors, as well as wall baseboards with this Ultrabond ECO 575 adhesive.

Choose this Ultrabond ECO 350 adhesive to install your vinyl composition or rubber tiles.

Choose this Ultrabond ECO 350 adhesive to install your vinyl composition or rubber tiles.

Choose this Ultrabond ECO 350 adhesive to install your vinyl composition or rubber tiles.

Choose this Ultrabond ECO 350 adhesive to install your vinyl composition or rubber tiles.

Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces.

Mapecem Quickpatch is a high-performance, fast-setting, cementitious material used for the patching of concrete surfaces.

Ready-to-use polymer-modified Grout Refresh colorant and sealer for grout joints, non-flammable and water based.

Ready-to-use polymer-modified Grout Refresh colorant and sealer for grout joints, non-flammable and water based.

Ready-to-use polymer-modified Grout Refresh colorant and sealer for grout joints, non-flammable and water based.

Ready-to-use polymer-modified Grout Refresh colorant and sealer for grout joints, non-flammable and water based.

Easily fill space between ceramic tiles with this amazing grout bag.

Enhance the appearance of your ceramic joints and your floor tiles with this rigid grout brush.

Use this scrubbing sponge to clean epoxy grout after ceramic tile laying.

Seal ceramic joints with this bottled brush sealing product.

Optimize your grout application with this Pro epoxy grout applicator.

Get a replacement blade for your grout rake.

Quickly and easily rake old grout between tiles with this tool.

This high-performance adhesive mortar is specifically formulated for Schluter membranes and panels. Designed for use both on and under all DITRA and KERDI products, it is slip-resistant and ideal for heavy and large-format tiles. Smooth and creamy, yet easy to spread, it is suitable for both indoor and outdoor use.

Ultrabond ECO 983 is a one-component, water-free, and solvent-free adhesive designed for wood flooring. Its silane-modified formula offers high bond strength and effective moisture control. This adhesive has a very low VOC emission rate and controls moisture up to 90% RH and 15 lb vapour emission rate. It comes with special trowel clips, allowing a single-layer application for optimal moisture control. It can also be trowelled on areas without subfloor moisture issues.

The Primer T is a water-based acrylic primer, magenta in colour and low in VOCs. It is designed to enhance the performance and adhesion of self-levelling underlayments on both porous and non-porous surfaces. Its versatility allows it to effectively bond to various substrates, while ensuring easy application and low odour emissions.

MAPEI Flexcolor CQ is a ready-to-use grout, ideal for residential and commercial installations of porcelain, ceramic, and natural stone tiles. It can be used both indoors and outdoors, and its colour-coated quartz formula provides uniform colour and easy application. Its dense composition reduces water absorption, helping to prevent stains. No sealer is required, and it is suitable for delicate surfaces after prior testing.

Mapelastic WaterStop liquid rubber waterproofing and crack-isolation membrane for installation under residential, commercial and industrial ceramic or stone tile. It is flexible, thin and quick drying. It provides a continuous barrier to protect adjacent floors and rooms below from water damage. Also prevents floor cracks (up to 1/8" [3 mm]) from transmitting through tile or stone.

Horseshoe shims for aligning marble, granite, porcelain and large format tiles. Horizontal and vertical installations. Produces a 1/16 inch (1.5 millimeter) grout joint. The shims are reusable. Place the tips in the grout joint to align and space.

Multi-purpose sponge with two sides, an abrasive side for scraping and a normal side for washing grout marks. Rounded corners prevent overflow and grout splatter. Excellent water retention capacity which ensures seal packing and perfect cleaning.

Wheel Tip Grout Sealer Applicator Bottle - 375 ml (12.7 oz). Comes complete with two wheels: 1/8" wheel for mosaic and tight spaced floor tiles and 1/4" wheel for wider joints. No mess, neat application and no dripping.

Get clean, precise cuts every time with this Richard Tungsten Carbide Cutting Wheel. Designed for use with tile cutters, this high-performance replacement blade is a simple and affordable way to boost your machine's cutting performance to like-new. This cutting wheel features a tungsten carbide edge for long-lasting performance. This carbide wheel is compatible with Richard Tile Cutters #120440-N (see BMR code 000-0116) and #102544-N (see BMR code 718-0314).

High-Performance, Rapid-Setting Grout with Maximized Color Depth and Color Consistency.