Tile Tools and Accessories

This ceramic adhesive is used for laying on the floor and on the walls of vitrified, semi-vitrified and non-vitrified ceramic tiles, ceramic mosaic, sandstone tiles, pavers and natural stone indoors or out. outside.

This additive is used to improve the performance of dry setting mortar.

Ideal for indoor concrete floors, the ULTRAPLAN 1 PLUS quick set compound is the product you need for your renovations.

This smooth and easy to spread adhesive is great to install ceramic or porcelain tiles on walls or floors.

This smooth and easy to spread adhesive is great to install ceramic or porcelain tiles on walls or floors.

This smooth and easy to spread adhesive is great to install ceramic or porcelain tiles on walls or floors.

This smooth and easy to spread adhesive is great to install ceramic or porcelain tiles on walls or floors.

Install your tiles either on the wall or the floor thanks to this adhesive.

Install your tiles either on the wall or the floor thanks to this adhesive.

Install your tiles either on the wall or the floor thanks to this adhesive.

Install your tiles either on the wall or the floor thanks to this adhesive.

Keracolor is a premium, premixed, polymer-modified, unsanded Portland cement grout for tile, requiring only the addition of water to mix. It is suitable for 1.5 to 3mm (1/16 '' to 1/8 '') joints

Keracolor is a premium, premixed, polymer-modified, unsanded Portland cement grout for tile, requiring only the addition of water to mix. It is suitable for 1.5 to 3mm (1/16 '' to 1/8 '') joints

Keracolor is a premium, premixed, polymer-modified, unsanded Portland cement grout for tile, requiring only the addition of water to mix. It is suitable for 1.5 to 3mm (1/16 '' to 1/8 '') joints

Keracolor is a premium, premixed, polymer-modified, unsanded Portland cement grout for tile, requiring only the addition of water to mix. It is suitable for 1.5 to 3mm (1/16 '' to 1/8 '') joints

Keracolor is a premium, premixed, polymer-modified, unsanded Portland cement grout for tile, requiring only the addition of water to mix. It is suitable for 1.5 to 3mm (1/16 '' to 1/8 '') joints

Keracolor is a premium, premixed, polymer-modified, unsanded Portland cement grout for tile, requiring only the addition of water to mix. It is suitable for 1.5 to 3mm (1/16 '' to 1/8 '') joints

Keracolor is a premium, premixed, polymer-modified, unsanded Portland cement grout for tile, requiring only the addition of water to mix. It is suitable for 1.5 to 3mm (1/16 '' to 1/8 '') joints

Keracolor is a premium, premixed, polymer-modified, unsanded Portland cement grout for tile, requiring only the addition of water to mix. It is suitable for 1.5 to 3mm (1/16 '' to 1/8 '') joints

Keracolor is a premium, premixed, polymer-modified, unsanded Portland cement grout for tile, requiring only the addition of water to mix. It is suitable for 1.5 to 3mm (1/16 '' to 1/8 '') joints

Ultrabond Eco WPA adhesive, designed specifically for wood flooring and plywood, is latex-based with a high solids content. It is ideal for installing prefinished wood flooring, whether for residential projects or light commercial applications. It can also be used to bond plywood panels in various construction projects, providing strong and durable adhesion.

Ultrabond Eco WPA wood flooring and plywood adhesive is latex-based with a high solids content. It is formulated for the installation of prefinished wood flooring in residential or light commercial applications. It can also be used to bond plywood panels in your construction projects.

Ultracolor Plus FA is a high-quality, fast-setting grout designed for joints from 1/16" to 3/4" (1.5 mm to 19 mm). Its DropEffect™ technology reduces water absorption and helps prevent dirt from penetrating the grout joints. Thanks to MAPEI's High-Hydration Cement Technology (HCT™), this grout avoids common issues associated with Portland cement-based grouts, such as colour inconsistency and efflorescence, while offering improved stain and moisture resistance.

Planislope RS is a rapid-setting, pre-blended, cement-based, polymer-modified mortar that includes a blend of selected aggregates for use in sloping and thick-bed mortar installations. It only needs mixing with water to produce a mortar of exceptional strength. Used for preparing a substrate before the installation of tile and stone, Planislope RS is designed for pre-sloping under waterproofing membranes and mortar beds in showers when quick turnarounds are desired.

This professional-grade adhesive for large-format heavy tiles is polymer-enriched. It is ideal for installing large-format tiles on floors, walls, and countertops.

High performance Planiprep SC, cementitious, thin-set, fiber-reinforced, polymer-modified patching and resurfacing compound. Resurface and smooth minor surface irregularities and imperfections on a variety of substrates. Tough and durable, ready to receive almost any floor covering.

MARSHALLTOWN Grout Bags allow you to fill joints between all brick, block, and stonework.

This tool is essential for applying the caulking effectively and cleanly.

Don't lose time mixing grout by hand, use this mixer which adapts to 3/8 in rods.

Effectively remove any type of seal without damaging the surface with this caulking scraper.

Use this caulking gun tip for clean and smooth joints after each use.

These leveling spacer wedges ensure stable and even tile installation. Made of polypropylene (PP), they facilitate levelling by maintaining consistent spacing. Their design prevents unwanted movement and guarantees precise alignment throughout the installation.

These leveling spacer wedges ensure precise and even tile alignment during installation. Made of polypropylene (PP), they provide optimal stability while facilitating tile leveling. They simplify the process by maintaining consistent spacing and preventing any unwanted movement during installation.

This spacer wedge support makes installation easier by ensuring precise alignment and a consistent finish. Made of polypropylene (PP), it maintains uniform spacing, preventing any shifting. Its ergonomic design allows for easy handling and quick placement.

Ideal for clean and harmonious finishes, this spacer wedge support simplifies the installation of coverings. Its polypropylene (PP) construction stabilizes tiles while maintaining an even gap. Designed for ease of use, it is simple to handle and speeds up the installation process.

This spacer wedge support ensures precise installation and a uniform finish for your coverings. Made of polypropylene (PP), it maintains a consistent spacing between tiles, preventing any unintended movement. Its clever design allows for intuitive handling, optimizing both speed and accuracy during installation.

This spacer wedge support ensures precise installation for a uniform finish on your coverings. Made of polypropylene (PP), it helps align tiles by maintaining consistent spacing, preventing any unwanted movement. Additionally, its well-designed structure allows for easy handling, speeding up the installation process.

These professional forged steel pliers are used for cutting ceramic tiles.

Renovate your floor by removing the old tiles easily with this amazing floor scraper.

Get an even spacing for your tiling with this soft tile spacer.

Get an even spacing for your tiling with this soft tile spacer.

Score and nip ceramic tiles to the desired size with these tile pliers.

The Adhesilex P10 cement is perfect for the installation of glass tile, glass mosaic, as well as marble mosaic.

Enhance the performance and adhesion of mortars to existing ceramics and difficult-to-bond substrates with this primer.

Finish the installation of your ceramic tiles with this Kerapoxy grout.

Finish the installation of your ceramic tiles with this Kerapoxy grout.

Finish the installation of your ceramic tiles with this Kerapoxy grout.

Finish the installation of your ceramic tiles with this Kerapoxy grout.